Belltech LOWERING BLOCK KIT 4inch EXTRUDED BLOCKS

Belltech

Belltech Lowering Blocks provide an inexpensive, easy to install way...
$71.11 $64.99
$64.99
Add to wishlist
Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.

This Part Fits:

Year Make Model Submodel
1995-1999 Chevrolet Blazer Base
1996-2004 Chevrolet Blazer LS
1995-2001 Chevrolet Blazer LT
1999-2001 Chevrolet Blazer Trailblazer
2001-2004 Chevrolet Blazer Xtreme
2003-2004 Chevrolet Blazer ZR2
1991 Chevrolet S10 Baja
1982-2003 Chevrolet S10 Base
1982-1990 Chevrolet S10 Durango
1992-1993 Chevrolet S10 EL
1994-2003 Chevrolet S10 LS
1982-1989 Chevrolet S10 Sport
1994-1998 Chevrolet S10 SS
1982-1992 Chevrolet S10 Tahoe
1999-2003 Chevrolet S10 Xtreme
1994-2003 Chevrolet S10 ZR2
1983-1994 Chevrolet S10 Blazer Base
1987-1989 Chevrolet S10 Blazer High Country
1994 Chevrolet S10 Blazer LT
1983-1990,1992 Chevrolet S10 Blazer Sport
1983-1988,1990-1994 Chevrolet S10 Blazer Tahoe
1991-1994 Chevrolet S10 Blazer Tahoe LT
2002-2004 GMC Envoy SLE
2002-2004 GMC Envoy SLT
2002-2004 GMC Envoy XL SLE
2002-2004 GMC Envoy XL SLT
2004 GMC Envoy XUV SLE
2004 GMC Envoy XUV SLT
1992-1996 GMC Jimmy Base
2000-2001 GMC Jimmy Diamond Edition
1998-2000 GMC Jimmy Envoy
1995-1999 GMC Jimmy SL
1992-2001 GMC Jimmy SLE
1993-2001 GMC Jimmy SLS
1992-2001 GMC Jimmy SLT
1982-1990 GMC S15 Base
1987 GMC S15 EL
1986-1988 GMC S15 Gypsy
1982-1990 GMC S15 High Sierra
1982-1990 GMC S15 Sierra Classic
1982 GMC S15 Sierra Grande
1983-1991 GMC S15 Jimmy Base
1983-1990 GMC S15 Jimmy Gypsy
1985 GMC S15 Jimmy High Sierra
1983-1990 GMC S15 Jimmy Sierra Classic
1991 GMC S15 Jimmy SLE
1991 GMC S15 Jimmy SLS
1991 GMC S15 Jimmy SLT
1988-1989 GMC S15 Jimmy Timberline
1991-1993 GMC Sonoma Base
1992 GMC Sonoma GT
1994-2003 GMC Sonoma SL
1991-2000 GMC Sonoma SLE
1993-2003 GMC Sonoma SLS
1996-2000 Isuzu Hombre S
1996-2000 Isuzu Hombre XS
1987-1992 Mitsubishi Mighty Max 1 Ton
1983-1996 Mitsubishi Mighty Max Base
1983-1984 Mitsubishi Mighty Max S
1983-1985 Mitsubishi Mighty Max SP
1986-1989 Mitsubishi Mighty Max Sport
1983-1989 Mitsubishi Mighty Max SPX
1984-1986 Nissan 720 Base
1984-1986 Nissan 720 Deluxe
1985-1986 Nissan 720 Sport Truck
1986-1994 Nissan D21 Base
1986-1989 Nissan D21 E
1986-1989 Nissan D21 SE
1986-1989,1994 Nissan D21 XE
1998 Nissan Frontier Base
1999 Nissan Frontier SE
1998-2000 Nissan Frontier XE
1995-1997 Nissan Pickup Base
1995-1997 Nissan Pickup XE
1984-1995 Toyota Pickup Base
1984-1995 Toyota Pickup DLX
1984-1995 Toyota Pickup SR5
1993-1998 Toyota T100 Base
1996-1997 Toyota T100 DLX
1994-1995 Toyota T100 DX
1993-1998 Toyota T100 SR5
2004 Toyota Tacoma Base
1998-2000 Toyota Tacoma Limited
1995-2000 Toyota Tacoma SR5
2000-2004 Toyota Tundra Base
2000-2004 Toyota Tundra Limited
2000-2004 Toyota Tundra SR5

JDM Alliance LLC., will not accept returns or refund money for items that do not fit. Only in the case when JDM Alliance LLC. is found to have mistakenly posted incorrect information about the JAPANESE Specifications will an exchange, return, or refund be considered. Make sure to read our DISCLAIMER below for additional details.

Shipping Information

Shipping / transportation charges are non-refundable. Please take this into consideration before purchasing. We have no control over how far you may be or might have had the item shipped; therefore we cannot assume the cost of having it returned from that location. In order to keep our prices low, we do not assume transportation charges into the price of our items. Customers are always welcome to pick up items locally from our warehouse.

DO NOT sign the release documents without fully inspecting the outer packaging for noticeable signs of damage. The freight companies will not let you open the package before signing, therefore you must note any signs of damage based on the outer packaging. Shipping insurance is provided by the freight company, not by JDM Alliance LLC.. If you sign the form and do not note any possible damages, the freight company will be released from all responsibility, and you will not be reimbursed for damages caused during shipping. JDM Alliance LLC. is not responsible for damages caused by mishandling during shipping. Do not sign the release form or let the driver leave without first inspecting the packaging for possible damages. So remember, you must note any signs of damages on the release form before signing.

JDM Alliance LLC. prides itself on offering engines of excellent quality. All our engines pass a Multi-point Inspection & Compression test to ensure great quality engines . We only ship engines with positive compression test results.

Limited Warranty Terms & Conditions

LIMITED WARRANTY OFFERED BY JDM Alliance LLC.

A. JDM Alliance LLC. warrants that every used engine sold by JDM Alliance LLC. will be in a serviceable condition, having regard to the nature of used engines, for the duration of time after the date of sale according to the following applications:

1. Used Replacement Engines – 30 Days

2. Used Performance Engines – 30 Days

3. Rotary Engines(Mazda RX-7 13BT/13BTT/20B ) – No Warranty

4. All Electronical/Electronic Parts – No Warranty

5. Used Performance Transmissions – No Warranty

6. Used Replacment Transmissions – 30 Days

B. ITEMS AND CONDITIONS COVERED BY THE LIMITED WARRANTY

1. All internal engine parts including: pistons, piston rings, piston pins, crankshaft and main bearings, connecting rods and rod bearings, camshaft and camshaft bearings, timing chain and timing gears, intake and exhaust valves, valve springs, seals, guides, oil pump, push rods, rocker arms and shafts. The engine block, cylinder walls and cylinder head are also warranted to be free of cracks or distortion.

2. Head gaskets are warranted for 30 days only, irrespective of the application as stated in Section (A).

3. JDM Alliance LLC. reserves the right to repair with rebuilt or serviceable used parts, or exchange the engine at its own discretion and determination.

C. ITEMS NOT COVERED

All external parts attached to the engines, e.g., intake and exhaust manifolds, carburetors, distributor, starter, emission control devices, flywheel, clutch and pressure plate, water pump, thermostat, belts, hoses, oil pan, valve cover, sensors, electronic parts(distributor, wires, Computers, injectors, etc), transmissions, drive shafts, engine mounts, half shaft, etc.

D. THIS LIMITED WARRANTY DOES NOT COVER

1. The cost of labor required to remove and install a repaired or exchanged engine to the vehicle.

2. Any damage caused by abuse, neglect, accident or natural perils.

3. Loss caused by the engine being improperly installed.

4. Towing charges and/or freight or delivery charges.

5. Loss caused by overheating. The warranty does not cover oil leaks, blown head gasket or any other engine damage due to over heating caused by poor water circulation, clogged radiator, stuck thermostat or a faulty water pump, etc.

6. Decrease in performance of any covered part due to normal wear and tear (unless actual breakdown occurs), having regard to inherent manufacturing faults in some engine models.

7. Loss caused by any modification or use of the engine for which it was not originally designed.

8. The engine if it is used for competitive driving or racing.

9. Loss caused by the failure of a part or parts of the engine that are not covered by this limited warranty.

10. Tune-ups and adjustments, filters, hoses, belts, lubricants, coolants, emission control devices, spark plugs, tune-up parts, etc.

11. Deterioration or pre-ignition damage.

12. Repairs performed without prior authorization from JDM Alliance LLC..

13. Loss caused by defective timing belt. A brand new timing belt must be installed.

14. Loss caused by modification or forced induction (NOS, Turbos, Supercharged) for which the engine was not designed.

E. LIMITATION OF DURATION

Repairs or exchanges will not extend this limited warranty beyond the described term on this form (Item A).

F. DISCLAIMER 1

This limited warranty is in lieu of any and all other expressed warranties of JDM Alliance LLC. . Any warranty implied is limited to the duration of this limited warranty. JDM Alliance LLC. does not assume or authorize any person to assume on its behalf any other obligation of liability.

G. DISCLAIMER 2

JDM Alliance LLC. will not be responsible for incidental or consequential damages arising from loss of use, loss of time, inconvenience, or commercial loss, or any other consequential damage or loss.

H. WARRANTY CLAIM PROCEDURE

1. To file a warranty claim, JDM Alliance will email a warranty cliam form to be filled out.  

2. The customer is responsible for all the freight charges on the return of defective engines and no replacement engine will be sent until our staff have inspected and verified the returned defective engine in question. If the engine is defective, JDM Alliance LLC. will either send a replacement engine or issue a refund minus the shipping charges.  

3. The engine MUST be returned in the same condition it was sent, all missing parts will be charged to the customer.

4. In the event that the wrong and/or defective engine is not returned to JDM Alliance LLC. within 60 days after a replacement engine is sent to our customer, the customer will be charged the full amount of the engine, plus all freight charges.

Engines complete with accessories may not comply with the emission control laws of the state in which it is being sold or used. State and/or federal authorities require that you change over the emission devices from your old engine to the engine you are installing to make it comply. The add-on parts on the engine sold by JDM Alliance LLC. are left attached for testing purpose only, for your convenience and are free of charge. The purchase price represents the cost of the long block only (i.e. cylinder head and short block only).

IMPORTANT: FAILURE TO FOLLOW THE FOLLOWING MAINTENANCE REQUIREMENTS VOIDS THE WARRANTY.

a. Must be installed, maintained, or adjusted by a certified mechanic.

b. Set ignition to specification as recommended by manufacturer.

c. Change oil after 500 miles.

d. Re-torque cylinder head bolts to manufacturer's specification.

e. Check cooling system and service if rusted or contaminated with oil and replace coolant.

f. Must replace the timing belt, oil filter, water pump and spark plugs.

Sales Policy

  • All sales are final, no refunds or exchanges.
  • No Deposit refunds.
  • Orders can be cancelled if they have not been shipped
  • A $25.00 fee will apply to cancelled orders payed by check.
  • All refused/returned orders will be charged 20% of the invoice amount for restocking fees plus all freight charges to return the item to our warehouse.

Condition of Used Engines

These are used engines which have been in use for 20,000-60,000 miles (depending on the year of manufacture) and are not brand new. There may be small scratches on the engine because it is used. There may also be fragile plastic, metal or rubber parts that could possibly bend or break during shipping. These parts can be replaced with parts from your original engine or bought from a local used auto parts store.

We cannot accept an engine in return if it was disassembled or parted.

Top

SALE ON NOW — ON SELECT PRODUCTS — NEW DEALS EVERY DAY!