JDM 98-05 Toyota Altezza OEM Clutch Master Cylinder 3SGE 3S-GE VVTi 6 Spd IS300
Please Note: Item is used and may show signs of imperfections. This item is in good shape with some minor discolorations, scuffs and surface scratches.
PLEASE REFER TO PICTURES FOR MORE DETAILS.
All the parts included as seen in the pictures for this item:
1 x OEM Altezza / IS300 Clutch Master Cylinder
THIS ITEM IS SOLD IN AS-IS CONDITION - NO WARRANTY
Pictures of the Actual Item - What you see is what you get! We do not use Sample Photos!
I have taken lots of HD pictures of this item. Please review them all carefully to see what the item comes with and the condition its in. Should you have any questions, please feel free to email me prior to placing your order.
This is is an imported JDM Part Directly from Japan. This item is from a right hand drive vehicle in Japan. Please consult with your Auto Technician prior to purchasing this item to make sure this item will work for you. While we will do our best to assist you, further research may be needed to check compatibility with your vehicle.
IT IS COMPLETELY THE BUYER'S RESPONSIBILITY TO MAKE SURE THIS ITEM WILL WORK FOR YOU PRIOR TO BUYING. WE DO NOT PROVIDE INSTALL INSTRUCTIONS.
JDM Alliance LLC., will not accept returns or refund money for items that do not fit. Only in the case when JDM Alliance LLC. is found to have mistakenly posted incorrect information about the JAPANESE Specifications will an exchange, return, or refund be considered. Make sure to read our DISCLAIMER below for additional details.
Shipping / transportation charges are non-refundable. Please take this into consideration before purchasing. We have no control over how far you may be or might have had the item shipped; therefore we cannot assume the cost of having it returned from that location. In order to keep our prices low, we do not assume transportation charges into the price of our items. Customers are always welcome to pick up items locally from our warehouse.
DO NOT sign the release documents without fully inspecting the outer packaging for noticeable signs of damage. The freight companies will not let you open the package before signing, therefore you must note any signs of damage based on the outer packaging. Shipping insurance is provided by the freight company, not by JDM Alliance LLC.. If you sign the form and do not note any possible damages, the freight company will be released from all responsibility, and you will not be reimbursed for damages caused during shipping. JDM Alliance LLC. is not responsible for damages caused by mishandling during shipping. Do not sign the release form or let the driver leave without first inspecting the packaging for possible damages. So remember, you must note any signs of damages on the release form before signing.
JDM Alliance LLC. prides itself on offering engines of excellent quality. All our engines pass a Multi-point Inspection & Compression test to ensure great quality engines . We only ship engines with positive compression test results.
Limited Warranty Terms & Conditions
LIMITED WARRANTY OFFERED BY JDM Alliance LLC.
A. JDM Alliance LLC. warrants that every used engine sold by JDM Alliance LLC. will be in a serviceable condition, having regard to the nature of used engines, for the duration of time after the date of sale according to the following applications:
1. Used Replacement Engines – 30 Days
2. Used Performance Engines – 30 Days
3. Rotary Engines(Mazda RX-7 13BT/13BTT/20B ) – No Warranty
4. All Electronical/Electronic Parts – No Warranty
5. Used Performance Transmissions – No Warranty
6. Used Replacment Transmissions – 30 Days
B. ITEMS AND CONDITIONS COVERED BY THE LIMITED WARRANTY
1. All internal engine parts including: pistons, piston rings, piston pins, crankshaft and main bearings, connecting rods and rod bearings, camshaft and camshaft bearings, timing chain and timing gears, intake and exhaust valves, valve springs, seals, guides, oil pump, push rods, rocker arms and shafts. The engine block, cylinder walls and cylinder head are also warranted to be free of cracks or distortion.
2. Head gaskets are warranted for 30 days only, irrespective of the application as stated in Section (A).
3. JDM Alliance LLC. reserves the right to repair with rebuilt or serviceable used parts, or exchange the engine at its own discretion and determination.
C. ITEMS NOT COVERED
All external parts attached to the engines, e.g., intake and exhaust manifolds, carburetors, distributor, starter, emission control devices, flywheel, clutch and pressure plate, water pump, thermostat, belts, hoses, oil pan, valve cover, sensors, electronic parts(distributor, wires, Computers, injectors, etc), transmissions, drive shafts, engine mounts, half shaft, etc.
D. THIS LIMITED WARRANTY DOES NOT COVER
1. The cost of labor required to remove and install a repaired or exchanged engine to the vehicle.
2. Any damage caused by abuse, neglect, accident or natural perils.
3. Loss caused by the engine being improperly installed.
4. Towing charges and/or freight or delivery charges.
5. Loss caused by overheating. The warranty does not cover oil leaks, blown head gasket or any other engine damage due to over heating caused by poor water circulation, clogged radiator, stuck thermostat or a faulty water pump, etc.
6. Decrease in performance of any covered part due to normal wear and tear (unless actual breakdown occurs), having regard to inherent manufacturing faults in some engine models.
7. Loss caused by any modification or use of the engine for which it was not originally designed.
8. The engine if it is used for competitive driving or racing.
9. Loss caused by the failure of a part or parts of the engine that are not covered by this limited warranty.
10. Tune-ups and adjustments, filters, hoses, belts, lubricants, coolants, emission control devices, spark plugs, tune-up parts, etc.
11. Deterioration or pre-ignition damage.
12. Repairs performed without prior authorization from JDM Alliance LLC..
13. Loss caused by defective timing belt. A brand new timing belt must be installed.
14. Loss caused by modification or forced induction (NOS, Turbos, Supercharged) for which the engine was not designed.
E. LIMITATION OF DURATION
Repairs or exchanges will not extend this limited warranty beyond the described term on this form (Item A).
F. DISCLAIMER 1
This limited warranty is in lieu of any and all other expressed warranties of JDM Alliance LLC. . Any warranty implied is limited to the duration of this limited warranty. JDM Alliance LLC. does not assume or authorize any person to assume on its behalf any other obligation of liability.
G. DISCLAIMER 2
JDM Alliance LLC. will not be responsible for incidental or consequential damages arising from loss of use, loss of time, inconvenience, or commercial loss, or any other consequential damage or loss.
H. WARRANTY CLAIM PROCEDURE
1. To file a warranty claim, JDM Alliance will email a warranty cliam form to be filled out.
2. The customer is responsible for all the freight charges on the return of defective engines and no replacement engine will be sent until our staff have inspected and verified the returned defective engine in question. If the engine is defective, JDM Alliance LLC. will either send a replacement engine or issue a refund minus the shipping charges.
3. The engine MUST be returned in the same condition it was sent, all missing parts will be charged to the customer.
4. In the event that the wrong and/or defective engine is not returned to JDM Alliance LLC. within 60 days after a replacement engine is sent to our customer, the customer will be charged the full amount of the engine, plus all freight charges.
Engines complete with accessories may not comply with the emission control laws of the state in which it is being sold or used. State and/or federal authorities require that you change over the emission devices from your old engine to the engine you are installing to make it comply. The add-on parts on the engine sold by JDM Alliance LLC. are left attached for testing purpose only, for your convenience and are free of charge. The purchase price represents the cost of the long block only (i.e. cylinder head and short block only).
IMPORTANT: FAILURE TO FOLLOW THE FOLLOWING MAINTENANCE REQUIREMENTS VOIDS THE WARRANTY.
a. Must be installed, maintained, or adjusted by a certified mechanic.
b. Set ignition to specification as recommended by manufacturer.
c. Change oil after 500 miles.
d. Re-torque cylinder head bolts to manufacturer's specification.
e. Check cooling system and service if rusted or contaminated with oil and replace coolant.
f. Must replace the timing belt, oil filter, water pump and spark plugs.
- All sales are final, no refunds or exchanges.
- No Deposit refunds.
- Orders can be cancelled if they have not been shipped
- A $25.00 fee will apply to cancelled orders payed by check.
- All refused/returned orders will be charged 20% of the invoice amount for restocking fees plus all freight charges to return the item to our warehouse.
Condition of Used Engines
These are used engines which have been in use for 20,000-60,000 miles (depending on the year of manufacture) and are not brand new. There may be small scratches on the engine because it is used. There may also be fragile plastic, metal or rubber parts that could possibly bend or break during shipping. These parts can be replaced with parts from your original engine or bought from a local used auto parts store.